Assembly the greatest Tony Hawk’s Professional Skater 3+4 settings is not a mammoth process, no matter whether or not you are taking part in on PC or a handheld just like the Steam Deck. There’s, nonetheless, an attention-grabbing change you can also make to how the sport seems through the sector of view setting.
The Tony Hawk’s Professional Skater 3+4 system necessities arrived very late, however had been about as demanding as we anticipated, with the sport just about copying the calls for of THPS 1+2. This implies you will not want the most effective graphics card from our purchasing information to run the sport, and a buttery clean body fee should not be too onerous to come back by in the event you observe our settings under.
Greatest Tony Hawk’s Professional Skater 3+4 settings for PC
- FPS Cap: Uncapped
- VSync: On
- Subject of View: 65
- Scaling/Anti-Aliasing: TAA
- Texture High quality: Highest
- Shadow High quality: Highest
- Texture Anisotropy: 16x
- Results High quality: Highest
- Ambient Occlusion: On
Utilizing the above settings on our RTX 4070 take a look at rig, we achieved a median body fee of 151fps with 1% lows of 102fps at 2,560 x 1,440. With minimal settings to regulate and lightweight system necessities, it was by no means going to be too troublesome to run THPS 3+4 on a contemporary gaming PC, but it surely’s nonetheless value commending how effectively optimized the sport is and the way effectively it runs.
Curiously, THPS 3+4 is one other sport the place selecting the best graphical preset does not really flip all of the settings as much as the max. We additionally discovered this to be the case in our greatest Persona 5 Phantom X settings testing. The Shadow High quality setting is left at ‘excessive’ in the event you go for the utmost preset. That is the one setting we modified, bumping it as much as the best setting.
One other key visible setting, nonetheless, is the sector of view. This may be set as much as a price of 90, and actually opens up ranges in the event you select to have it this excessive, as you might have a greater view of the place goals and collectibles are, however your chosen skater will probably be a lot smaller, changing into much less of a spotlight when utilizing this setting, as you may see within the under comparability picture.
Having performed round with the sector of view for a while, 65 felt just like the candy spot, however that is completely a private choice setting, and relying on what decision you are taking part in on, your required worth could differ.
Nvidia DLSS and AMD FSR are choices within the menu, however we see no cause to deploy them given how the sport runs natively. In case you’re struggling to get respectable efficiency with out them, then by all means give them a attempt. To unlock these settings, you will want to change the anti-aliasing choice from TAA to both DLSS or FSR.
Greatest Tony Hawk’s Professional Skater 3+4 settings for Steam Deck
- FPS Cap: 60
- VSync: On
- Subject of View: 60
- Scaling/Anti-Aliasing: FSR
- AMD FSR: High quality
- Texture High quality: Low
- Shadow High quality: Low
- Texture Anisotropy: 2x
- Results High quality: Low
- Ambient Occlusion: Off
Utilizing the above settings on the Steam Deck, you may anticipate a stable 60fps throughout all ranges on Tony Hawk’s Professional Skater 3+4. The sport runs remarkably effectively on the most effective gaming handheld, and when you can pursue higher visuals at the price of efficiency, it isn’t fairly value it.
As you will see within the subsequent part, the distinction between the utmost and lowest graphics settings is kind of small, and the above settings are successfully the low preset and nonetheless look respectable when working at 60fps on a handheld.
You will get away with utilizing the utmost graphics preset on the Steam Deck, however you will be halving the anticipated body fee right down to 30fps with some instability on the bigger, city-based maps.
To be able to be sure to have the identical expertise as us, you’ll want to replace to the most recent steady model of SteamOS and use the Proton Experimental construct.
Tony Hawk’s Professional Skater 3+4 graphics presets
- Lowest
- Low
- Medium
- Excessive
- Most
I used to be shocked to see 5 whole presets in THPS 3+4, given the restricted graphical settings, but it surely’s nice to see loads of scope to regulate the visible high quality of the sport primarily based on the PC or handheld you are utilizing.
As you may see within the picture under, nonetheless, there is not an enormous leap in high quality between the utmost and lowest settings. Granted, the advantages of shifting to the utmost preset are greatest felt throughout gameplay, and the extent of element adjustments with every location, so in ranges like The Foundry, there is a smaller hole in visible high quality than, say, San Francisco.
How we examined Tony Hawk’s Professional Skater 3+4
At , we use devoted gaming rigs to check the most effective settings for efficiency and gameplay within the newest releases. The take a look at rig used to play THPS 3+4 consists of the next elements: Intel Core i7-11700F, Nvidia GeForce RTX 4070 12GB, 32GB of DDR4 3,200MHz RAM in a dual-channel configuration, and an MSI B560 motherboard. We additionally take a look at utilizing Home windows 11 64-bit.
We at all times run our testing first at 1,920 x 1,080 to establish the most effective settings for this entry-level decision, then once more at 2,560 x 1,440 utilizing the identical setup to gauge the distinction in efficiency. We use CapFrameX to seize body information and examine testing periods.
Does Tony Hawk’s Professional Skater 3+4 want an SSD?
THPS 3+4 doesn’t require an SSD, however with out one, you’ll doubtless expertise longer load instances between ranges. Subsequently, it is extremely beneficial that you just improve in the event you nonetheless use a mechanical drive.
In case you seize your self the most effective SSD from our purchasing information in your gaming PC, it’s going to actually assist preserve sport loading instances in examine and get you into the motion a lot faster.
The way to monitor efficiency in Tony Hawk’s Professional Skater 3+4
If you wish to control efficiency in THPS 3+4, now we have a simple methodology that works whether or not you are utilizing an Nvidia or AMD graphics card.
For Nvidia playing cards, guarantee you might have the Nvidia App put in and the in-game overlay enabled, after which hit ALT + R in-game to convey up your efficiency monitor. With AMD playing cards, you may allow efficiency monitoring through the Radeon overlay utilizing the shortcut CTRL + SHIFT + O.
Alternatively, you may obtain free software program equivalent to CapFrameX or Nvidia FrameView, to get a cleaner, extra simplified benchmarking device that works with any graphics card.
With handheld gaming PCs, most can have a devoted button to entry a fast menu from which efficiency monitoring, generally referred to as real-time monitoring, could be accessed.
In case you’re leaping into Tony Hawk’s Professional Skater 3+4, it would be best to take a look at our information on easy methods to unlock the Spongebob stage in THPS 3+4 and our information on easy methods to wallplant in THPS 3+4.
You possibly can observe us on Google Information for each day PC video games information, opinions, and guides. We have additionally received a vibrant neighborhood Discord server, the place you may chat about this story with members of the staff and fellow readers.
